Instruction Manual
D104239X012
Multiport Flow Selector
January 2019
39
Valve Control
Valve Control allows all functions of the system to be
tested prior to commissioning with the DCS. It
provides for a Dashboard for Controlling the MPA and
providing Host ESD. It also includes a tab for Alarm
Status.
Valve Control can be used to command the actuator to
go to the next port or go to a desired port number. “Go
to Port” is the new setpoint in the range of 0 to 8 for
the 8 ports (including the Home Port).
Based on selections for general display preferences in
DCMLink™ Setup, the Dashboard can display Digital
indication of Setpoint, Port Position, and Torque.
Figure 24.
Figure 25.
Figure 26.
Figure 27.
To Next Page
Loading...
