Emerson Hytork XL Series - Pinion Assembly and Alignment

March 2024
Safety Guide
DOC.SG.HX.1 Rev. 2
15
Appendix A: EU Declaration of Conformity
Appendix
Appendix
We hereby declare, that the products specied below meet the basic health and safety requirements of the
below mentioned European Directives.
EU Declaration of Conformity
Issued in accordance with:
Pressure Equipment Directive (PED)
2014/68/EU
• For Gas Group 2 (see DOC.SG.HX.1, Section 3.2.1,
Operating Media), Hytork XL-Series pneumatic
actuators are excluded from the requirements
of the Pressure Equipment Directive 2014/68/EU
based on Article 1, Section 2(f) of the directive.
• For Gas Group 1 pressure media, rst consult
engineering to check compatibility of pressure
media with the actuator.
• The below listed limited range of Hytork XL-Series
actuator sizes are rated “Sound-Engineering-Practice”
or Module A (Internal Production Control) and are
available on request for use with Gas Group 1 media.
• Double-acting and spring-return actuators
• Sizes: XL26, XL71, XL131, XL186, XL221, XL281,
XL426, XL681, XL1127 and XL1372
EU Declaration of Conformity
Issued in accordance with:
ATEX Directive 2014/34/EU
ATEX Marking:
• II 2G Ex h IIC TX Gb
II 2D Ex h IIIC TX Db
• For maximum temperature limits and classications,
see Safety Guide: DOC.SG.HX.1, Section 5,
Safety Instructions for Use in (Potential)
Explosive Atmosphere.
Applicable Standards:
• EN IEC 60079-0:2018 EN ISO 80079-36:2016
EN ISO 80079-37:2016 EN 1127-1:2019
Declaration of Incorporation of
Partly Completed Machinery
Issued in accordance with:
Machinery Directive 2006/42/EC,
Appendix IIb
Essential requirements applied and complied with:
• 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.4, 1.3.7, 1.5.2, 1.5.3,
1.5.4, 1.5.7, 1.6.1, 1.7.1, 1.7.3 and 1.7.4.
• Technical documentation is drafted in compliance
with Appendix VII, Section B.
• Before the actuator is put into operation, the
machine into or onto which the actuator will be
installed, must comply with the stipulations of the
machinery directive.
• The relevant information concerning the machine
or part will be available in the event of a motivated
request from national authorities.
Applicable Standards:
• EN ISO 12100:2010
Product Description:
• Hytork™ XL-Series Pneumatic actuator
• Double-acting and spring-return actuators
• Sizes: XL26, XL71, XL131, XL186, XL221, XL281,
XL426, XL681, XL1127, XL1372, XL2586 and XL4581
Product Variations:
• Product variations of the below mentioned types
are still covered by the listed directive and are
CE marked.
Serial Number:
• Each actuator has an identiable serial number.
Manufacturer:
• Emerson Process Management
Valve Automation (M) Sdn. Bhd.
Lot 13112, Mukim Labu,
Kawasan Perindustrian Nilai,
71807 Nilai, Negeri Sembilan
Malaysia
Legal representative entity for the European Union:
Emerson S.R.L., Company No. J12/88/2006, Emerson 4 street,
Parcul Industrial Tetarom II, Cluj-Napoca 400638, Romania
Regulatory Compliance Shared Services Department
Email: europeproductcompliance@emerson.com
Phone: +40 374 132 035
VCCAQ-15691-EN
ROC no 9010
Rev. 1
_____________________________
Signed:
Name:
Position:
Date:
Place:
Bharat Shirolikar
Director, Global
Product Engineering
2023-10-01
Houston TX, U.S.A.