Temperature Display Adjust – Default
is 0°. Your thermostat was accurately
calibrated at the factory. However,
this option allows you to change the
humidity or temperature displayed to
match other thermostats in your home.
Dehumidication Setpoint – Default is
95%. Setpoint is the percent humidity
that the cooling system will attempt
to maintain. Only available when
dehumidication equipment is enabled
(see Communicating Devices in
Advanced Installer Menu).
Humidity Setpoint – Default is 20%.
Humidity setpoint is the percent
humidity that the heating system and
humidier will attempt to maintain in
Heating.
Only available when humidication
equipment is enabled (see Communi-
cating Devices in Advanced Installer
Menu).
Main Menu
To Next Page
Loading...
