Emerson LD320EM5 User Manual

Camera Angles
DVD
Some DVD may contain scenes which have been shot simultaneously
from various Angles. You can change the Camera Angle if X appears on
the screen. If ANGLE ICON is set to OFF in OTHERS menu, X will not
appear. L p. 33
1
During Playback, press MODE repeatedly until appears.
2
Use H I repeatedly until your desired Camera Angle appears.
1 / 8 (ANGLE)
Angles can be varied on
the displayed number
3
Press BACK to EXIT.
Black Level Setting
DVD
Adjust the Black Level to make the dark areas of the TV picture brighter.
1
During Playback, press MODE repeatedly until appears.
2
Press H I to adjust the Black Level.
ON
Makes the Dark Areas brighter.
OFF
Shows the Original Picture as recorded.
3
Press BACK to EXIT.
Note(s)
●
The setting will be kept even if the Unit goes into Standby Mode.
Stereo Sound Mode
CD
This Unit allows you to select a Sound Mode during CD Playback.
1
During Playback, press SAP / AUDIO repeatedly until the desired
Sound Mode appears.
2
Each time you press SAP / AUDIO, the Sound Mode changes as
follows.
STEREO
Stereo Sound with Left and Right Channels.
L-ch
Left Channel Sound Only.
R-ch
Right Channel Sound Only.
Note(s)
●
Virtual Surround cannot be changed when the Sound Mode is set to either L-ch or R-
ch.
Virtual Surround
You can enjoy Virtual Surround on your 2 channel Stereo System.
1
During Playback, press MODE repeatedly until appears.
2
Press H I to select the Sound Level.
1
Natural Effect.
2
Emphasized Effect.
OFF
No Effects (original sound).
3
Press BACK to EXIT.
Note(s)
●
The Setting will be kept even if the Unit is Turned Off.
●
For Audio CD, Virtual Surround will not be effective if the Sound Mode is set to something
other than STEREO. Stereo Sound Mode.
Stereo Sound Mode L p. 40
●
Turn down the level or select OFF if the Sound is distorted.
Marker Setup
This feature allows you to assign a specific point on a Disc to be called
back later.
To set a Marker
1
During Playback, press MODE repeatedly until / appears.
2
Use H I repeatedly until Marker Search Menu appears.
3
Use J K to select an available Marker within 60 seconds.
4
When the Playback reaches the point at which you want to set a
Marker, press OK.
●
Marker is now set.
5
Press BACK to EXIT.
To return to the Marker later
1
Repeat steps 1-2 in To set a Marker. Use J K to select the desired
Marker.
2
Press OK at the desired Marker to Restart Playback from the specific
point which you set.
Note(s)
●
Marker Search Menu will disappear in about 60 seconds when there is no Input.
●
You can Mark up to 10 points.
●
To Clear a Marker, select the Marker to be Cleared, and then press CLEAR.
●
Ejecting the Disc or turning off the Power will Erase all Markers.
●
Selecting at step 3 in the section (To set a Marker) will also Erase all Markers.
40 .English

Emerson LD320EM5 Specifications

General

Brand	Emerson
Model	LD320EM5
Category	TV
Language	English