Emerson Liebert APM 90 - Chapter 8 Option; Option List

Chapter 8 Option 55
Liebert APM 90 Integrated Modular UPS User Manual
Chapter 8 Option
This chapter provides the UPS option list and introduces the functions and installation of the options.
8.1 Option List
Table 8-1 lists all of the UPS options.
Table 8-1 Option list
No. Option Model Part No. Remark
1 Battery temperature sensor UF-SENSOR 02350174
2 LBS cable (5m, 10m, 15m)
04118683 (5m)
04118684 (10m)
04118685 (15m)
3 SIC card UF-SNMP810 02351817
Installed in Intellislot 1, 2 or 3
port*
4 Relay card UF-DRY310 02354309
Installed in Intellislot 1 or 3 port,
advisably in Intellislot 3 port*
5 Modbus card UFMOD41Z1 02354066
Installed in Intellislot 1 or 3 port,
advisably in Intellislot 3 port*
6 UF-RS485 card UF-RS485 02351786
Installed in Intellislot 1 or 3 port,
advisably in Intellislot 3 port*
7 LBS adapter UF-LBS01 02350359
8
SiteMonitor monitoring
software
UPS02R100
UPS03R100
UPS03R100
05112042
05112043
05112044
9 SPM monitoring module UHRF3S672Z7 02352143
10
Basic unit for common
distribution
UHRF3S672Z15 02353995
Intelligent MCB
distribution
module
APM-IDM 02352141
Providing current and switch
state detection function
Intelligent
hot-pluggable
MCB distribution
module
APM-SIDM 02352142
Providing current and switch
state detection function
Non-intelligent
MCB distribution
module
APM-DM 02353962
No current or switch state
detection function
11
Output
distribution
module
Non-intelligent
hot-pluggable
MCB distribution
module
APM-SDM 02353963
No current or switch state
detection function
*: 1. Intellislot 1 port shares communication resource with the RS232 port. To avoid conflict, when the RS232 port is used
for service or commissioning, it is not recommended to use Intellislot 1 port.
2. Intellislot 2 port shares communication resource with the SPM monitoring module. If the SPM monitoring module is
configured, optional communication cards cannot be installed in Intellislot 2 port.