Emerson Liebert GXT4-5000RT208 - Installation; Unpacking and Inspection; Whats Included

Installation
17 Liebert
®
GXT4
™
User Manual
2.0 Installation
Do NOT attempt to start the UPS, turn on any circuit breaker or energize the input power until instructed to
do so in 4.2 - Starting the UPS.
2.1 Unpacking and Inspection
Unpack the UPS and conduct the following checks:
• Inspect the UPS for shipping damage. Report any shipping damage to the carrier and your local dealer
or Emerson
®
representative immediately.
• Check the accessories against the delivery list. If there is any discrepancy, contact your local dealer or
your Emerson representative immediately
2.2 What’s Included
The Liebert GXT4 is shipped with the following items:
• Terminal Block Communication terminals
• Compact Disk with
• Liebert MultiLink
®
• Configuration program
• User manual (electronic version)
• Liebert IntelliSlot
®
Web card (IS-WEBCARD), factory-installed
• USB cable, one; 1.2 m (3.9 ft.)
• Rack mounting hardware including screws, handles, and rack slide kit
• Power Distribution Box, installed on Liebert GXT4
• Support base set, one
• Warnings, Safety Instructions booklet and WEEE recycling sheet (ISO 14001 compliance)
!
CAUTION
The UPS is heavy (see 8.0 - Specifications). Take proper precautions when lifting or
moving it.
NOTE
The GXT4 External Battery Cabinet shipping package includes one battery cabinet, two spacers
for tower configuration, one DC power cable and rack mounting hardware, including screws,
handles and mounting rail kit.