12 Chapter 3 Web Page Of RDU-SIC G2
RDU-SIC G2 Card User Manual
3.3.1 Time Calibrating Link
The lower left part displays the system time of RDU-SIC G2. Clicking the RDU-SIC G2 time will jump to the time
calibrating page. For detailed operation, refer to Date/Time Setting in 3.4.6 System Options.
3.3.2 Clearing Time-Out
When there is no operation on the page within 15min, the page will become uncontrollable, as shown in Figure 3-12.
Figure 3-12 Controllable status
Click [Clear] Time-out, the input box shown in Figure 3-13 will appear. After typing the password, the controllable
status will become normal after about 5s.
Figure 3-13 Password verification
3.3.3 Logout
Click the Logout at the upper right corner of the homepage, the prompt box shown in Figure 3-14 will appear, clicking
OK will log out safely.
Figure 3-14 Logout
3.3.4 Real-Time Alarm Pop-Up Setting
The real-time alarm displaying list is contracted on the bottom of the page by default. You can perform the following
operation by referring to Figure 3-11:
1. Click Display Current Alarms manually, and the real-time alarm displaying list will pop up;
2. Tick Auto Pop-out, and the real-time alarm displaying list will pop up when an alarm is generated;
3. Tick Alarm Sounds, and the system will play alarm sound through the browser when an alarm is generated.
3.4 Menu Items
On the homepage of RDU-SIC G2, the menu items include Device Info, Safe Shutdown, Alarm Management,
Data&History, Device Options, System Options and Help.
To Next Page
Loading...
