Chapter 3 Web Page Of RDU-SIC G2 25
RDU-SIC G2 Card User Manual
Figure 3-41 Modify device name
On the page shown in Figure 3-41, you can modify the device name. Type the new device name and click the Set
button to make all setting effective.
Note
The characters of device name and signal name can be English letters, digits, space and underline. If other characters are typed,
the prompt box shown in Figure 3-42 will pop up.
Figure 3-42 Prompt box of invalid characters
Batch Configuration
Click the Batch Configuration under the Device Options menu, the page shown in Figure 3-43 pops up.
Figure 3-43 Batch configuration
On the page, you can perform Upload and Download operations to complete batch configuration.
Note
1. Only ‘admin’ has the authority of batch configuration. If you fail in performing batch configuration, please click Show Help to
view the help information.
2. The batch configuration file is encrypted after downloaded to local.
To Next Page
Loading...
