© 2021 Emerson Climate Technologies Inc.
Introduction
The Lumity wireless data loggers measure temperature.
Designed to meet Centers for Disease Control and
Prevention (CDC) guidelines, this logger is ideal for
clinical applications, such as vaccines storage and other
Healthcare monitoring solutions. This Bluetooth® Low
Energy-enabled logger is designed for wireless
communication with a mobile device. It also transmits
over 900 MHz frequency to TempTrak Server. Using the
Lumity Logger app, you can easily configure the device
with one of two different probe types Standard Probe or
Lab/Cryogenic probe for freezer or refrigerator
monitoring. You can also quickly perform daily device
checks, download reports, and monitor alarms. Use the
built-in LCD screen on the device to check the current
temperature, maximum or minimum temperatures,
alarms, battery use, and more.
Specifications
Lab/Cryogenic RTD
Temperature Probe
Model No. 10134 Comes with
Product Simulator Sleeve
(10184)
-328°F to 311°F (-200°C to
155°C)
±0.5°C at 25°C (±1.0°F at
77°F)
Shaft diameter .25” (6 mm),
Shaft length 3” (76mm)
2.0” x 1.5” dia. (51 mm x 38
mm dia.)
Standard
Temperature
Sensor
-25° to 180°F (-32° to 82°C)
±0.5°C at 25°C (±1.0°F at
77°F)
Radio 1: 900 MHz Radio 2:
Bluetooth 4.1
900MHz: 2500 feet (762
meters) (open field range) (To
be validated)
Bluetooth 4.1: 100 feet (30.5
meters) (open field range) (To
be validated)
Radio Power for
Bluetooth 5.0
FX100 with Standard Probe:
±0.5°C from -50° to 150°C
(±0.9°F from -58° to 302°F)
FX100 with Lab/Cryogenic
RTD Probe:
±0.5°C from -200° to 180°C
(±0.9°F from -328° to 356°F)
±1.0°C from 180° to 500°C
(±1.8°F from 356° to 932°F)
Data Logger
Operating Range
-10° to 50°C (14° to 122°F), 0
to 95% RH (non-condensing)
1, 5, 10, 15 or 20 Minute
±1 minute per month at 25°C
(77°F)
Two AA 1.5 V Lithium
Batteries, user replaceable
2 year, typical with logging
interval of 5 minutes. Faster
logging intervals, remaining
connected with the Lumity
Logger app, excessive report
generation & numerous