Section 2 – Page 2
2.4 Amplifier Mounting
The LX drives must be mounted in a vertical orientation to insure the best air flow
between the cooling fins of the heatsink. Mounting above other drives or any heat
producing equipment may result in overheating.
The mounting brackets are attached to the LX drive heatsink by self tapping screws and
thus are well grounded to the amplifier chassis. There are two ways to mount the drive
depending on the placement of the mounting brackets. The physical dimensions of all
the LX amplifiers are identical. See Figure 2-1 for mounting information.
Figure 2.1 Amplifier Mounting Information
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
To Next Page
Loading...
