Emerson MICRO MOTION 1500 - Page 24

Unit description
Label
ProLink III Field Communicator
Grams per second
g/sec g/s
Grams per minute
g/min g/min
Grams per hour
g/hr g/h
Kilograms per second
kg/sec kg/s
Kilograms per minute
kg/min kg/min
Kilograms per hour
kg/hr kg/h
Kilograms per day
kg/day kg/d
Metric tons per minute
mTon/min MetTon/min
Metric tons per hour
mTon/hr MetTon/h
Metric tons per day
mTon/day MetTon/d
Pounds per second
lbs/sec lb/s
Pounds per minute
lbs/min lb/min
Pounds per hour
lbs/hr lb/h
Pounds per day
lbs/day lb/d
Short tons (2000 pounds) per minute
sTon/min STon/min
Short tons (2000 pounds) per hour
sTon/hr STon/h
Short tons (2000 pounds) per day
sTon/day STon/d
Long tons (2240 pounds) per hour
lTon/hr LTon/h
Long tons (2240 pounds) per day
lTon/day LTon/d
Special unit
special Spcl
Define a special measurement unit for mass flow
ProLink III
Device Tools > Configuration > Process Measurement > Flow > Special Units
Field Communicator Configure > Manual Setup > Measurements > Special Units > Mass Special Units
Overview
A special measurement unit is a user-defined unit of measure that allows you to report
process data, totalizer data, and inventory data in a unit that is not available in the
transmitter. A special measurement unit is calculated from an existing measurement unit
using a conversion factor.
Procedure
1. Specify Base Mass Unit.
Base Mass Unit is the existing mass unit that the special unit will be based on.
Configure process measurement
18 Micro Motion Model 1500 Transmitters with Analog Outputs