1 Before you begin
Topics covered in this chapter:
•
About this manual
•
Transmitter model code
•
Communications tools and protocols
•
Additional documentation and resources
1.1 About this manual
This manual helps you configure, commission, use, maintain, and troubleshoot the
Model 1500 transmitter.
Important
This manual assumes that the following conditions apply:
• The transmitter has been installed correctly and completely according to the instructions in
the transmitter installation manual
• The installation complies with all applicable safety requirements
• The user is trained in local and corporate safety standards
1.2
Transmitter model code
You can verify that this manual pertains to your transmitter by ensuring the model code on
the transmitter tag matches the format.
Example:
The transmitter has a model number of the following form: 1500DEB**A******
D
4-wire remote DIN rail–mount
E
4-wire remote DIN rail transmitter with 9-wire remote enhanced core processor
B
4-wire remote DIN rail transmitter with 9-wire remote core processor
A
Analog outputs option board
1.3 Communications tools and protocols
You must have a communications tool to interface with the transmitter. Several different
communications tools and protocols are supported. You may use different tools in
different locations or for different tasks.
Before you begin
Configuration and Use Manual 3
To Next Page
Loading...
