52 Micro Motion
®
Model 1500 Transmitters with the Filling and Dosing Application
Optional Transmitter Configuration
6.14 Configuring device settings
The device settings are used to describe the flowmeter components. Table 6-9 lists and defines the
device settings.
If you are entering a date, use the left and right arrows at the top of the calendar to select the year and
month, then click on a date.
6.15 Configuring sensor parameters
The sensor parameters are used to describe the sensor component of your flowmeter. They are not
used in transmitter processing, and are not required. The following sensor parameters can be changed:
• Serial number
• Model number
• Sensor material
• Liner material
•Flange
Table 6-9 Device settings
Parameter Description
Tag Also called the “software tag.” Used by other devices on the network to identify this transmitter. The
tag must be unique on the network. Not used in transmitter processing and not required.
Maximum length: 8 characters.
Descriptor Any user-supplied description. Not used in transmitter processing, and not required.
Maximum length: 16 characters.
Message Any user-supplied message. Not used in transmitter processing, and not required.
Maximum length: 32 characters.
Date Any user-selected date. Not used in transmitter processing, and not required.
To Next Page
Loading...
