Need help?Do you have a question about the Emerson Micro Motion Elite Coriolis CMFS025 and is the answer not in the manual?
General| Model | CMFS025 |
|---|---|
| Type | Coriolis Flow Meter |
| Category | Accessories |
| Manufacturer | Emerson |
| Product Line | Micro Motion Elite |
| Connection Type | Flanged, Threaded |
| Accessory Type | Flow Measurement |
| Compatibility | Compatible with Emerson transmitters |
Ensure hazardous area suitability, verify ambient/process temperatures, and follow wiring instructions.
Guidelines for sensor installation, including pipe runs, flow direction, valve placement, and stress.
Details ambient and process temperature ranges for sensors, including notes on electronics and insulation.
Guidance for hygienic applications, focusing on vertical installation, cleanability, and drainability.
Safety guidelines and equipment recommendations for safely lifting and transporting heavy sensors.
Instructions for mounting the sensor, minimizing torque/bending load, and orientation tips.
Procedure to rotate the integrally mounted junction box or core processor in 45-degree increments.
Instructions for mounting electronics of high-temperature sensors separately on a wall or pole.
Optional mounting configuration for CMF010 sensors on small or flexible pipelines using wall or pole mounts.
Procedure for mounting CMFS007, CMFS010, or CMFS015 sensors using an optional bracket.
Instructions for assembling and attaching the wall mount bracket for CMFS025, CMFS040, or CMFS050 sensors.
Steps for securely clamping wafer-style sensors into the pipeline using alignment rings and bolts.
Procedure for installing the extender onto the sensor case for installations with extended electronics.
Overview of wiring procedures based on different electronics options like integral, extended, and MVD Direct Connect.
Guidance on 4-wire cable types, usage, preparation with conduit or glands, and terminal connections.
Procedure for preparing and connecting the 9-wire cable to the junction box and transmitter terminals.
Procedure for purging the sensor case with inert gas, including prerequisites and safety warnings.
Information on rupture disks installed on the sensor case for venting process fluid in case of tube breach.
To Next Page