Need help?Do you have a question about the Emerson Micro Motion F300 and is the answer not in the manual?
General| Brand | Emerson |
|---|---|
| Model | Micro Motion F300 |
| Category | Accessories |
| Language | English |
Provides information on planning, mounting, wiring, and grounding the F-Series sensor.
Defines hazard message criteria based on ANSI standards Z535.6-2011 (R2017).
Lists additional product documentation available on DVD or online at emerson.com.
Ensures hazardous area suitability and verifies temperature limits before installation.
Guidance for optimal sensor performance, including pipe run requirements and orientation.
Details process and ambient temperature ranges for sensor operation and electronics.
Guidance on physically installing the sensor to minimize torque and bending load on connections.
Instructions for connecting separate electronic components to the sensor case using an extender.
Outlines different wiring procedures based on the installed electronics option.
Detailed procedures for preparing and connecting the 4-wire cable to the core processor terminals.
Steps for preparing and connecting the 9-wire cable to the junction box terminals.
Lists guides and requirements for proper grounding practices based on applicable standards.
Steps to ensure the meter is properly grounded to earth or the facility's ground network.
Procedure for purging the sensor case with inert gas (argon or nitrogen) for maintenance.
Information on rupture disks that vent process fluid in case of a tube breach.
To Next Page