Need help?Do you have a question about the Emerson Micro Motion Elite Coriolis CMF350 and is the answer not in the manual?
General| Process Connection | Flanged, threaded |
|---|---|
| Material | 316L stainless steel |
| Communication Protocol | HART, Modbus |
| Accessory Type | Flow Meter |
| Size Range | 1 to 4 in (25 to 100 mm) |
| Output | 4-20 mA, frequency, pulse |
| Power Supply | 24 VDC |
| Certifications | ATEX, IECEx, FM |
Steps to ensure the meter is suitable for its environment and correctly wired.
Specifies ambient and process temperature ranges for safe sensor operation.
Instructions for properly mounting the sensor to minimize stress and condensation.
Procedure for clamping wafer-style sensors into the pipeline using a wafer installation kit.
Detailed instructions for connecting 4-wire cables, including types and preparation.
Steps for preparing and connecting a 9-wire cable to the junction box terminals.
To Next Page