Chapter 5 Use Of Monitoring Module M800D 71
Figure 1.11 Modify M800D information
In the screen shown in Figure 4-40, user can modify the information of M800D such as the site name and site
location.
In the screen shown in Figure 4-40, user can click the button [Modify device], following screen pops up:
Figure 1.12 Modify device
In the screen shown in Figure 4-41, user can modify the device name. All entering the new device name, click “Set” to
validate the change.
NetSure 501 A50, NetSure 501 AA0, NetSure 701 A51 19-Inch Subrack Power Supply System User Manual
To Next Page
Loading...
