18 PACSystems™ RSTi-EP EPSCPE115 Standalone CPU Quick Start Guide GFK-3039C
Figure 11: Configuring as an Embedded PROFINET Controller
OPC UA Server Configuration
To configure CPE115 as an OPC UA server, refer to Chapter 10 of the PACSystems RX3i
and RSTi-EP TCP/IP Ethernet Communications User’s Manual, GFK-2224.
Serial Port Configuration
CPE115 provides two serial ports - COM1(RS-232) and COM2(RS-485). They can each
be configured for one of the supported modes using PAC Machine Edition Tool
(Version 9.50 & SIM 15 or later). For more details on the configuration of serial ports,
refer to section 3.2.10 of the PACSystems RX3i and RSTi-EP CPU Reference Manual,
GFK-2222.
To Next Page
Loading...
