21 PACSystems™ RSTi-EP EPSCPE115 Standalone CPU Quick Start Guide GFK-3039C
For more details on the configuration of the above set-up and the typical loopback
time across all the PROFINET nodes, please refer to GFK-3086. It also documents
other examples of system configurations and the performance limitations of this
product
Product Limitations
1. Timed interrupt blocks are not supported.
2. RDSD are not supported.
3. SNTP not Supported.
4. DNP3 Outstation not supported
Note: The above features may be supported in a subsequent firmware release. Refer
to the Important Product Information document for this product, GFK-3013.
To Next Page
Loading...
