Emerson PACSystems RX3i PROFINET - Upgrades and Enhancements; New Features and Resolved Issues

GFK-2573Z Sep 2020
9
Upgrades
Upgrade Kit: 41G2472-FW01-000-A4
Only IC695PNC001-Bxxx or later revision modules are field upgradable to this release using the upgrade kit listed
above. IC695PNC001-Ax modules cannot be upgraded with this kit due to hardware and firmware design changes in
the PNC001-Bxxx revision.
Applications using the IC695CPE302, CPE305, CPE310, or CPE330 Version 10.05 (or later) with a PNC001-Bxxx must
also upgrade the PNC to Version 3.16 (or later) for compatibility with the CPE3xx controller.
Release in line with software license compliance requirements.
New Features and Enhancements
Subject
Description
N/A
No new features added with this release.
Problems Resolved in this Release
None.