EasyManuals Logo
Home>Emerson>Controller>PNC001-A Series

Emerson PNC001-A Series Quick Start Guide

Emerson PNC001-A Series
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Quick Start Guide Section 1
GFK-2941K Sep 2019
User Features 2
support for up to 32 I/O devices and update rates of 1 512ms. I/O device update
rates of 8ms and faster are possible with 16 or fewer devices. When there are
more than 16 devices configured, update rates of 16ms and higher are available.
Supports two independents 10/100/1000 Ethernet LANs. As shown in Figure-1,
LAN1 attaches via the upper, dedicated RJ-45 connector. LAN2 attaches via the
lower pair of internally-switched RJ-45 connectors.
The embedded Ethernet interface is supported by a dedicated microprocessor
core. This dedicated processing capability permits the CPU to support these two
LANs with:
o up to 48 simultaneous SRTP Server connections;
o up to 16 simultaneous Modbus/TCP Server connections;
o 32 Clients are permitted; each may be SRTP or Modbus/TCP.
o OPC UA Server with support for up to 5 concurrent sessions with up to
10 concurrent variable subscriptions and up to 12,500 variables;
o up to 255 simultaneous Class 1 Ethernet Global Data (EGD)
exchanges;
o two independent Redundant IP addresses, one for each of the
embedded Ethernet LANs.

Other manuals for Emerson PNC001-A Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Emerson PNC001-A Series and is the answer not in the manual?

Emerson PNC001-A Series Specifications

General IconGeneral
BrandEmerson
ModelPNC001-A Series
CategoryController
LanguageEnglish

Related product manuals