OPERATING INSTRUCTIONS
USING THE REMOTE CONTROL
TURNING THE UNIT ON
Plug air conditioner into the outlet. Press the POWER button on the remote (when turned on, the unit starts operating in
the same mode as when it was turned off).
To switch the unit off, press POWER button again, then remove the plug.
Do NOT switch the unit off by removing the plug.
Always switch it off by pushing on the POWER button and waiting few minutes before removing the plug.
Cool mode
Press the MODE button " " until the left side control LCD
screen displays an arrow "◀ " next to " * ".
Press the Fan Speed button " " to choose the desired fan speed;
the " ▶" indicator will be lit.
You can select fan speed: "Hi", "Med", "Low", and "Auto".
Press the" ▼ "and " ▲ " button to choose the temperature you want.
Dry mode
Press the MODE button " " until the arrow "◀" appears next to " ".
At the same time, the " ▶" indicator appears next to Low speed; other
speeds cannot be selected.
Fan mode
Press the MODE button " " until the arrow "◀ " appears next to " "
In this mode, you can select the fan speed: “hi", "med", "low",
or "auto" by pressing the Fan speed button.
In this mode, the air exhaust hose does not need to be connected.
To Next Page
Loading...
Need help?
General
