26. If a start code is included with the upgrade it must be entered before full
functionality can be achieved.
27. Start WinSetup board, find the upgraded 2410 Device, right click on it and select
properties. Under Advanced tab select on Upgrade Device button.
28. Enter the Start Code as specified in the information provided with the upgrade.
Select OK and Apply to close the properties window.
29. Your 2410 device is now upgraded. You may need to make additional configuration
adjustments based on type of upgrade. See the Rosemount 2410 Tank Hub
Reference Manual for more details.
Upgrade procedure Manual Supplement
January 2022 00809-0200-2410
18 Emerson.com/Rosemount
To Next Page
Loading...
