Emerson Rosemount 3051S Series Quick Installation Guide

www.rosemount.com
¢00825-0100-4801J¤
HART
®
Quick Installation Guide
00825-0100-4801, Rev HA
February 2008
Rosemount 3051S
Rosemount 3051S Series Pressure
Transmitter with HART
®
Protocol
Rosemount 3051SF Series Flowmeter
Transmitter with HART
®
Protocol
© 2008 Rosemount Inc. All rights reserved. All marks property of owner. Rosemount and the
Rosemount logotype are registered trademarks of Rosemount Inc.
Step 1: Mount the Transmitter
Step 2: Consider Housing Rotation
Step 3: Set Switches and Jumpers
Step 4: Connect Wiring and Power Up
Step 5: Verify Configuration
Step 6: Trim the Transmitter
Safety Instrumented Systems
Product Certifications
Start
End
4801_QIG_RevHA.fm Page 1 Tuesday, February 26, 2008 12:17 PM

Emerson Rosemount 3051S Series Specifications

General

Measurement Type	Differential, Gage, Absolute, Level
Accuracy	±0.04% of span
Output	4-20 mA HART, FOUNDATION Fieldbus
Process Temperature Range	-40 to 121 °C (-40 to 250 °F)
Material	316L SST, Alloy C-276, Monel, Tantalum
Power Supply	10.5 to 42 VDC (depending on options and approvals)
Communication Protocols	HART, FOUNDATION Fieldbus, PROFIBUS PA, WirelessHART
Service	Liquid, Gas, Steam
Warranty	5 years
Response Time	100 ms
Diagnostics	Advanced diagnostics
Certifications/Approvals	ATEX, IECEx, CSA, FM
Process Connection	1/4–18 NPT, 1/2-14 NPT
Electrical Connection	1/2–14 NPT, M20 x 1.5
Operating Temperature	-40°C to 85°C (-40°F to 185°F)
Storage Temperature	-40 to 185°F (-40 to 85°C)
Protection Rating	IP66/67, NEMA 4X
Pressure Range	Up to 20, 000 psi (1378.95 bar)