Emerson Rosemount 3051SAL - 2.6 Review configuration data

10
Reference Manual
00809-0200-4802, Rev BA
Section 2: Configuration
May 2013
Configuration
2.6 Review configuration data
The following is a list of factory default configurations that can be viewed by using the Field
Communicator or AMS. Follow the steps below to review the transmitter configuration
information.
Note
Information and procedures in this section that make use of Field Communicator fast key
sequences and AMS assume that the transmitter and communication equipment are
connected, powered, and operating correctly.
2.6.1 Review Pressure Information
To view pressure information:
1. From the Home screen, choose 2: Configure.
2. Choose 2: Manual Setup.
3. Choose 2: Pressure.
4. Choose from the corresponding number to view each field:
Fast Keys
2, 2, 2
1 Pressure
2 Pressure Status
3 Units
4 Damping
5 Sensor Limits