Emerson Rosemount 3814 - 3.7.2 Base enclosure security seals

Figure 3-18: Transmitter Electronics Enclosure security seals
A. Transmitter Electronics Enclosure end cap
B. Security wire seals
30. Adjust the security wire, removing all slack and thread into the lead seal.
31. Crimp seal and cut wire ends to remove excess wire.
32. If required, attach the security wire seals on the Base Enclosure.
Meter maintenance Maintenance and Troubleshooting Manual
January2023 00809-0100-3814
60 Emerson.com/Rosemount