Product Data Sheet
00813-0100-4530, Rev DA
December 2010
Rosemount 5300 Series
10
(3) Requires option None for sealing (no O-ring).
(4) Welding Procedure Qualification Record Documentation will be supplied.
(5) For other materials, consult the factory.
(6) Consult the factory for this option.
(7) Requires High Temperature High Pressure (code H), High Pressure (code P), or Cryogenic (code C) probe.
(8) Available in SST. Consult the factory for other materials.
(9) 0.79 lb (0.36 kg) standard weight for flexible single lead probe. L=5.5 in. (140 mm).
For PTFE covered probes: 2.2 lb (1 kg) standard weight for flexible single lead probe. L=17.1 in. (434 mm).
(10) Extra length for fastening is added in factory.
(11) Requires model 5301. 1.3 lb (0.6 kg) standard weight for twin flex lead probe. L=3.5 in. (90 mm).
(12) Only available with standard temperature and pressure (code S).
(13) This is an HTHP probe.
(14) Probe weight included if applicable. Give the total probe length in feet and inches or meters and centimeters, depending on selected probe length unit.
If tank height is unknown, please round up to an even length when ordering. Probes can be cut to exact length in field. Maximum allowable length is
determined by process conditions. See “Tank Connection and Probe” on page 31 for more probe length guidance.
(15) Available in 316L SST. For other materials consult the factory.
(16) Raised face type for SST flanges up to class 1500.
(17) Available in 316L and EN 1.4404. For other materials consult the factory.
(18) Type A flat face for SST flanges up to PN100 and type B2 raised face for SST flanges PN160 and PN250.
(19) Raised face type for SST flanges.
(20) Probes are intrinsically safe.
(21) Requires F
OUNDATION fieldbus signal output (U
i
parameter listed in “Product Certifications” on page 36).
(22) For standard tank connection, only available with flange.
(23) For Material SST, Alloy C-276 and Alloy 400; Probe Type 3A, 3B, 4A, 4B, 4U, and 4V.
(24) Not available with PTFE covered probes.
(25) Only for Material of Construction code 1 and 3. For other materials, consult the factory.
(26) The standard alarm setting is high.
(27) Certificate includes all pressure retaining wetted parts.
(28) Available for SST and Alloy C-276 probes, type 2A, 4A, 4B, and 5A. Same disc material as probe material. For more information, see “Centering Discs” on
page 35.
(29) Available for probe types 2A, 4A, 4B and 5A, except for HTHP.
(30) Not available for Cryogenic probe.
Example Model String: 5301-H-A-1-S-1-V-1A-M-002-05-AA-I1-M1C1. E-002-05, means 2 ft and 5 in. probe length. M-002-05, means 2.05 m.
To Next Page
Loading...
