Product Data Sheet
00813-0100-4530, Rev DA
December 2010
11
Rosemount 5300 Series
Rosemount 5303
Level for Solids
Rosemount 5303 Guided Wave Radar Level transmitter provides industry leading
measurement capabilities and reliability on solids. Characteristics include:
• Direct Switch Technology and Probe End Projection to handle low reflective media
and long measuring ranges
• Measurement independent of dust, moisture and material fluctuations
• HART 4-20 mA, F
OUNDATION fieldbus
, Modbus
,
or IEC 62591 (WirelessHART) with
the Smart Wireless THUM adapter
• Probes for high physical weight loads (probe type 6A and 6B)
• Long stud available to prevent contact with nozzle (LS option)
Additional Information
Specifications: page 16
Certifications: page 36
Dimensional drawings: page 39
TABLE 2. 5303 Level for Solids Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
Model Product Description
5303 Guided Wave Solids Level Transmitter
Signal Output
Standard Standard
H 4-20 mA with HART communication ★
FF
OUNDATION fieldbus ★
M RS-485 with Modbus communication ★
Housing Material
Standard Standard
A Polyurethane-covered Aluminum ★
Expanded
S Stainless Steel, Grade CF8M (ASTM A743)
Conduit / Cable Threads
Standard Standard
1 ½ - 14 NPT ★
2 M20 x 1.5 adapter ★
E M12, 4-pin, Male connector (eurofast
®
)
(1)
★
M A size Mini, 4-pin, Male connector (minifast
®
)
(1)
★
Operating Temperature and Pressure Probe Type
Standard Standard
S - 15 psig (-1bar) to 580 psig (40 bar) @ 302 °F (150 °C)
(2)
Single Lead Probes only ★
Material of Construction
(3)
: Process Connection / Probe Probe Type
Standard Standard
1 316L SST (EN 1.4404) Single Lead Probes only ★
Sealing, O-ring Material (Consult factory for other o-ring materials)
Standard Standard
VViton
®
fluoroelastomer ★
E Ethylene Propylene ★
To Next Page
Loading...
