Emerson Rosemount 8700M

To Next Page

To Previous Page

Quick Start Guide

August 2015

Approvals Document

July 24, 2015

08732-AP01, Rev AF

Canadian Standards Association (CSA)

CLASS 2258 02 - PROCESS CONTROL EQUIPMENT - For Hazardous Locations – To Canadian Requirements.

N6 Class I, Groups A, B, C and D (Intrinsically Safe Output and Electrode circuit)

N6 Class I, Division 2, Groups A, B, C and D (Non-Incendive)

N6 Class II, Division 1, Groups E, F and G (Dust Ignition Proof)

Magnetic Flow Meter – Model 8732EM Transmitter with integral or remote mount to Model 8705M or Model

8711M/L Magnetic Flow Tubes. Enclosure Type 4X and IP 66 Rated.

For Remote Mount Configuration – Temperature Code T4 with an Ambient Operating Temperature Range: -40°C

чdĂчнϲϬΣǁŝƚŚŽƌǁŝƚŚŽƵƚ>ŵĞƚĞƌǁŝƚŚŽƌǁŝƚŚŽƵƚĚŝŐŝƚĂů/KĂŶĚŽƌƉƵůƐĞŽƵƚƉƵƚƐǁŚĞŶŝŶƐƚĂůůĞĚƉĞƌ

Rosemount Drawing 08732-2061.

For Integral Mount Configuration – Ambient Operating Temperature Range: -29°C чdĂчнϲϬΣ. Temperature

Code T3-T6 dependent on line size of Flow Tubes for Process Temperature. The T-Code is defined as per

Rosemount Drawing 08705-00CS and 08732-00CS for ‘N6’ option or ‘KU’ option.

CLASS 2258 82 - PROCESS CONTROL EQUIPMENT - For Hazardous Locations –To US Requirements

KU Class I, Division 1, Groups C and D (Explosion Proof)

N6, KU Class I, Groups A, B, C and D (Intrinsically Safe Output and Electrode circuit

N6, KU Class I, Division 2, Groups A, B, C and D (Non-Incendive)

N6, KU Class II, Division 1, Groups E, F and G (Dust Ignition Proof)

Magnetic Flow Meter – Model 8732EM Transmitter with integral or remote mount to Model 8705M or Model

8711M/L Magnetic Flow Tubes. Enclosure Type 4X and IP 66 Rated.

For Remote Mount Configuration – Temperature Code T6 for Explosion Proof, T5 for Dust Ignition Proof, and T4

for Non-Incendive. Ambient Operating Temperature Range: -ϰϬΣчdĂчнϲϬΣǁŝƚŚŽƌǁŝƚŚŽƵƚ>ŵĞƚĞƌǁŝƚŚ

or without digital I/O and/or pulse outputs when installed per Rosemount Drawing 08732-2061.

For Integral Mount Configuration – Ambient Operating Temperature Range: -ϮϵΣч dĂчнϲϬΣ. Temperature

Code T3-T6 dependent on line size of Flow Tubes for Process Temperature. The T-Code is defined as per

Rosemount Drawing 08705-00CS and 08732-00CS for ‘N6’ option or ‘KU’ option.

Special Conditions of Safe Use:

1. For use with the appropriate 8705M and 8711M/L Flow tubes only.

2. When the 8732EM transmitter is integrally mounted to 8705M or 8711M/L Flow Tubes, the ambient

temperature ranges marked on each product need to be taken into consideration before installation.

The Ambient temperature range for 8732EM transmitter is -ϰϬΣчdĂчнϲϬΣĂŶĚƚŚĞĂŵďŝĞŶƚ

temperature range for 8705M or 8711M/L Flow Tubes is -ϮϵΣчdĂчнϲϬΣ Therefore, the -29°C rating

of the flow tubes will limit the overall cold temperature range of the complete system unless other

approved temperature control methods are employed.

Emerson Rosemount 8700M - Page 41