Quick Installation Guide
00825-0100-4727, Rev CC
January 2013
Rosemount 8700 Series
25
Product Certifications
Approved Manufacturing Locations
Rosemount Inc. — Eden Prairie, Minnesota, USA
Fisher-Rosemount Technologias de Flujo, S.A. de C.V. — Chihuahua Mexico
Emerson Process Management Flow — Ede, The Netherlands
Asia Flow Technology Center — Nanjing, China
European Directive Information
The EC Declaration of Conformity can be found on page 34. The most recent revision can
be found at www.rosemount.com.
Type n protection type in accordance with EN50021
• Closing of entries in the device must be carried out using the appropriate
EEx e or EEx n metal cable gland and metal blanking plug or any appropriate ATEX
approved cable gland and blanking plug with IP66 rating certified by an EU approved
certification body.
Complies with Essential Health and Safety Requirements:
EN 61241-0: 2006
EN 61241-1: 2004
European Pressure Equipment Directive (PED) (97/23/EC)
Rosemount 8705 and 8707 Magnetic Flowmeter sensors in line size and flange
combinations:
Line Size: 1
1
/2 in. - 24 in. with all DIN flanges and ANSI 150 and
ANSI 300 flanges. Also available with ANSI 600 flanges in limited line sizes.
Line Size: 30 in. - 36 in. with AWWA 125 flanges
QS Certificate of Assessment - EC No. 59552-2009-CE-HOU-DNV
Module H Conformity Assessment
Rosemount 8711 Magnetic Flowmeter Sensors
Line Sizes: 1.5, 2, 3, 4, 6, and 8 in.
QS Certificate of Assessment - EC No. 59552-2009-CE-HOU-DNV
Module H Conformity Assessment
Rosemount 8721 Sanitary Magmeter Sensors
in line sizes of 1
1
/2 in. and larger:
Module H Conformity Assessment
4727_revCC_QIG.fm Page 25 Thursday, January 10, 2013 6:08 PM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page