Sensi
TM
Wi-Fi Programmable Thermostat | INSTALLATION GUIDE 7
Label your wires
Using the provided wire label stickers, label your wires
by removing one wire at a time.
Disconnect wires
and remove base
After all of your wires are labelled, remove the old thermo-
stat base from the wall.
Install sensi base
Use the provided mounting screws and secure the Sensi
base to the wall.
Connect the Wires
Once the Sensi base is mounted and secured on the wall,
insert the wires into the terminals. Simply push the wires
into the terminal slots. Use a screwdriver to secure each
wire in place
Attach cover
Push the front display onto the thermostat base.
Turn on power
Turn the power to your system back on.
INSTALLING THE SENSI THERMOSTAT
To Next Page
Loading...
Need help?
General
