Sensi
TM
Wi-Fi Programmable Thermostat | INSTALLATION GUIDE 6
Throw away any jumper wires
Sensi has a jumper wire built into it, and you will not need
any jumper wires from your old unit.
Choose wire terminals
Choose the terminal labels that have wires attached to them
on your old thermostat here. The app will tell you if you
have a valid configuration.
If you are getting an invalid configuration message you can learn
more about compatibility at sensicomfort.com/compatibility.
System type
Select what type of system you have.
INSTALLING THE SENSI THERMOSTAT
To Next Page
Loading...
Need help?
General
