Sensi
TM
Wi-Fi Programmable Thermostat | INSTALLATION GUIDE 5
Turn off power
Turn off the power to your heating and air conditioning system
before handling your thermostat wires.
Remove old thermostat cover
Remove the cover using a screwdriver or by pushing the pressure
latch. Some covers pull off while others need to be released
using a screwdriver.
Photograph your wiring
THIS IS IMPORTANT. The Sensi app will prompt you to take a picture
of your existing thermostat and old wiring in case you need it later.
This can be helpful for troubleshooting with our technical support
team if necessary. The picture you take will be saved to your camera
roll or photo gallery.
INSTALLING THE SENSI THERMOSTAT
To Next Page
Loading...
