Sensi
TM
Wi-Fi Programmable Thermostat | INSTALLATION GUIDE 4
Installation
Once you have downloaded the Sensi app, and have created an account,
you are ready to install the thermostat to your wall and connect it to Wi-Fi.
If no thermostats are registered yet, the Sensi app will prompt you to
add a thermostat.
First, choose which thermostat you purchased. The Sensi Wi-Fi Programmable
Thermostat option is for the following model numbers:
• 1F86U-42WF
• UP500W
Note: You can check your model number on the back of the thermostat faceplate.
Install path
After creating an account, signing in and choosing your model, the app will
ask you whether or not the thermostat is already on the wall. You will either
choose “No, it needs to be installed,” or “Yes, it is on the wall.”
The first option will walk through the entire installation process. If you did
not have this thermostat professionally installed, choose this option.
The second option is for connecting your thermostat to Wi-Fi only. If you
have had a professional install your thermostat, and you just need to connect
the Sensi thermostat to your home Wi-Fi network, choose this option.
No, it needs to be installed.
This option will walk you through the entire installation process, including
identifying and connecting your wiring, as well as connecting to Wi-Fi. The
Sensi app will walk through a step-by-step process for installation.
Gather tools
and package contents
Gather all the necessary tools for installation.
INSTALLING THE SENSI THERMOSTAT
To Next Page
Loading...
Need help?
General
