Sensi
TM
Wi-Fi Programmable Thermostat | INSTALLATION GUIDE 8
A
32
1
CONNECTING THE SENSI THERMOSTAT
Connecting to wi-fi
This portion of the installation guide covers how to connect
your thermostat to Wi-Fi. If you chose the first option, “No,
it needs to be installed,” the app will provide instructions for
installing and wiring your thermostat before you connect to
Wi-Fi. If you chose, “Yes, it is on the wall,” the app will jump
right into connecting your thermostat to Wi-Fi.
1. PRESS MENU, THEN CONNECT
The Wi-Fi signal will flash in the upper left hand corner
of the thermostat.
In the app, press “Next” to continue. *Do not press “Next” on
the thermostat.
2. IDENTIFY SENSI THERMOSTAT
Select what option your thermostat displays. Once you see a
checkbox next to your selection, press “Next” to continue.
3. CONNECT YOUR iOS DEVICE 10.0 OR LATER
Go into your iPhone’s/iPad’s Wi-Fi Settings, and you’ll see a list
of available networks. Select the Sensi network. Once you get
the blue check mark next to the “Sensi” network return to the
Sensi app. Press the “Next” button to continue.
Note: To connect to Wi-Fi using an Android device move to step 4.
A. SENSI PASSWORD
Input the Sensi password that came in the packaging
as the Sensi PIN. If you lost the card, this code can be
found on the back of the thermostat face plate. Press
“Next” to continue. Skip to step 4.
To Next Page
Loading...
Need help?
General
