Emerson Sensi 1F87U-42WF User Manual

Remove Base
After all of your wires are labeled, remove the old thermostat base from the wall.
Install Sensi Base
Use the provided mounting screws and secure the Sensi base to the wall.
Connect the Wires
Once the Sensi base is mounted and secured on the wall, inserthe wires into the terminals. Simply push the wires
into the terminal slots. Use a screwdriver to secure each wire in place
Attach Cover
Push the front display onto the thermostat base.

Emerson Sensi 1F87U-42WF Specifications

General

Brand	Emerson
Model	Sensi 1F87U-42WF
Category	Thermostat
Language	English