EasyManua.ls Logo

Emerson Topworx D Series User Manual

Emerson Topworx D Series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TopWorx
D-Series with AS-interface
Installation, Operation & Maintenance Manual
Table of Contents
2 Switchbox Orientation
3 Mounting
3 Storage
4 DXP Dimensional Drawing
3 DXP - IIC Dimensional Drawing
6 DXS Dimensional Drawing
7 DXR Dimensional Drawing
8 Shaft Detail
9 Enclosure/Indicator Assembly
10 SCM Calibration
11 Spool Valves & Pilots
12 Spool Valves & Pilots
13 Safe Use
14 Certifications & Approvals
15 Warranty

Other manuals for Emerson Topworx D Series

Question and Answer IconNeed help?

Do you have a question about the Emerson Topworx D Series and is the answer not in the manual?

Emerson Topworx D Series Specifications

General IconGeneral
CategoryController
Operating Temperature-40°C to 85°C
Output Signal4-20 mA
Enclosure RatingNEMA 4X
Pressure RangeNot Applicable
Housing MaterialAluminum
Ingress ProtectionIP66
CertificationsATEX, IECEx
Communication ProtocolHART, Foundation Fieldbus, AS-Interface
Number of Outputs2
Number of InputsVaries depending on model (typically 2)

Summary

Installation on Actuator

Orientations, Normal and Reverse Acting

Explains the two primary operating modes and their corresponding valve positions and indicator directions.

Mounting

Provides guidance and considerations for physically attaching the TopWorx unit to a valve.

Storage

Outlines recommended conditions for storing the unit before installation to maintain integrity.

Dimensions and Materials: TopWorx DXP

Dimensions and Materials: TopWorx DXP - IIC

Dimensions and Materials: TopWorx DXS

Dimensions and Materials: TopWorx DXR

Dimensions and Materials: Shafts

Pneumatic Hookup Procedures

Spool Valves and Pilots

Safe Use

Certifications & Approvals

Warranty

Related product manuals