To Next PageTo Next Page
Need help?Do you have a question about the Emerson Tescom ER5050 and is the answer not in the manual?
General| Model | ER5050 |
|---|---|
| Type | Electronic Pressure Controller |
| Power Supply | 24 VDC |
| Supply Voltage | 24 VDC ±10% |
| Communication Protocol | RS-485 Modbus RTU |
| Communication | RS-485 Modbus RTU |
| Output Signal | 4-20 mA |
| Wetted Materials | 316L Stainless Steel |
Details the technical specifications for the ER5000, including enclosure, weight, media, and environment.
Outlines the specific specifications for the ER5050 Hazardous Location model.
Explains the ER5000's function as a microprocessor-based PID controller for pressure control applications.
Details the process of selecting optimal PID settings (Kp, Ki, Kd) for controller performance.
Describes a typical application for controlling system pressure using the ER5000 with an air-actuated regulator.
Guidance on verifying the application's configuration, including components and connections for typical setup.
Checklists for ensuring supply pressure, filters, lines, and fittings meet operational requirements.
Confirmation of understanding all safety warnings and cautions before operation.
Step-by-step instructions for mounting the ER5000 controller onto the regulator.
Procedures for connecting and verifying the 24V DC power supply to the ER5000 controller.
Wiring instructions for connecting the transducer to provide a feedback signal to the ER5000.
Guide on downloading, installing, and setting up the ERTune™ software for controller configuration.
Steps for connecting the inlet pressure source and understanding output pressure connections.
Final steps for system startup, connecting regulator pressure, and optimizing performance with ERTune™.
Overview of wiring options for configuring the ER5000 for various application requirements.
Details on wiring all ER5000 models to a 24V DC power supply, regardless of configuration.
Specific instructions and warnings for installing the ER5050 in hazardous locations per codes.
Overview of the ERTune™ program's capabilities for setup, tuning, and monitoring the ER5000.
Step-by-step guide for installing the ERTune™ software and its components.
Instructions on how to launch the ERTune™ program, including troubleshooting for communication errors.
