Unidrive M300/HS30 Quick Start Guide 5
Issue Number: 6
Declaration of Conformity
(including 2006 Machinery Directive)
This declaration applies to the Unidrive-M product range comprising model numbers listed below:
The model number may be followed by additional characters that do not affect the ratings.
This declaration relates to these products when used as a safety component of a machine. Only the Safe
Torque Off function may be used for a safety function of a machine. None of the other functions of the drive
may be used to carry out a safety function.
These products fulfil all the relevant provisions of the Machinery Directive 2006/42/EC and the EMC Directive 2014/
108/EC.
EC type examination has been carried out by the following notified body:
TUV Rheinland Industrie Service GmbH
Am Grauen Stein
D-51105 Köln
Germany
Notified body identification number: 0035
EC type-examination certificate numbers:
01/205/5270.01/14 dated 2014-11-11
01/205/5387.01/15 dated 2015-01-29
01/205/5383.02/15 dated 2015-04-21
The harmonised standards used are shown below:
Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
Moteurs Leroy-Somer
Usine des Agriers
Boulevard Marcellin Leroy
CS10015
16915 Angoulême Cedex 9
France
Model
No.
Interpretation Format: Xaaa-bbc ddddde Format: Xaa-bbc ddddde
X Application
M = Manufacturing Automation, E = Elevator, F = Flow,
H = HVAC, CSD = Compressor
HS = High Speed
aa(a) Control System 100, 101, 200, 201, 300, 400, 600, 700, 701, 702 70, 71, 72
bb Frame Size 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11
c Voltage Rating 1 = 100 V, 2 = 200 V, 4 = 400 V, 5 = 575 V, 6 = 690 V
ddddd Current Rating Example 01000 = 100 A
e Configuration
A = AC in AC out (with internal choke), D = DC in AC out (Inverter), C = AC in DC out
(Rectifier), E = AC in AC out (without internal choke), T = AC in AC out with Dual
Rectifier
EN 61800-5-1:2007
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements -
Electrical, thermal and energy
EN 61800-5-2:2007
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements -
Functional
EN ISO 13849-1:2008
Safety of Machinery, Safety-related parts of control systems, General principles for
design
EN ISO 13849-2:2008 Safety of machinery, Safety-related parts of control systems. Validation
EN 61800-3: 2004
Adjustable speed electrical power drive systems - Part 3: EMC requirements and
specific test methods
EN 62061:2005
Safety of machinery, Functional safety of safety related electrical, electronic and
programmable electronic control systems
Unidrive M300 Quick Start Guide English Iss6.book Page 5 Tuesday, September 22, 2015 3:21 PM
To Next Page
Loading...
Need help?
General
