Emerson Unidrive M100 - Page 58

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization NV Media Card
Advanced
parameters
Diagnostics UL Listing
58 Unidrive M100 / M101 Control User Guide
Issue Number: 1
Parameter
Range (Ú) Default (Ö)
Type
OL OL
02.001 Post Ramp Reference VM_SPEED_FREQ_REF Hz
RO Num ND NC PT
02.003 Ramp Hold Off (0) or On (1) Off (0) RW Bit US
02.004 Ramp Mode Select
FASt (0), Std (1), Std.bSt (2),
FSt.bSt (3)
Std (1) RW Txt US
02.006 S Ramp Enable Off (0) or On (1) Off (0) RW Bit US
02.007
Max Rate Of Change Of
Acceleration
0.0 to 300.0 s²/100Hz 3.1 s²/100 Hz RW Num US
02.008 Standard Ramp Voltage 0 to VM_DC_VOLTAGE_SET V
110 V drive: 375 V
200 V drive: 375 V
400 V drive 50
Hz: 750 V
400 V drive 60
Hz: 775 V
575 V drive: 895 V
690 V drive: 1075 V
RW Num RA US
02.009
Deceleration Fail Detection
Disable
Off (0) or On (1) Off (0) RW Bit US
02.010 Acceleration Rate Selector 0 to 9 0 RW Num US
02.011 Acceleration Rate 1
0.0 to VM_ACCEL_RATE s / 100 Hz 5.0 s / 100 Hz
RW Num US
02.012 Acceleration Rate 2 RW Num US
02.013 Acceleration Rate 3 RW Num US
02.014 Acceleration Rate 4 RW Num US
02.015 Acceleration Rate 5 RW Num US
02.016 Acceleration Rate 6 RW Num US
02.017 Acceleration Rate 7 RW Num US
02.018 Acceleration Rate 8 RW Num US
02.019 Jog Acceleration Rate 0.0 to VM_ACCEL_RATE s / 100 Hz 0.2 s / 100 Hz RW Num US
02.020 Deceleration Rate Selector 0 to 9 0 RW Num US
02.021 Deceleration Rate 1
0.0 to VM_ACCEL_RATE s / 100 Hz 10.0 s / 100 Hz
RW Num US
02.022 Deceleration Rate 2 RW Num US
02.023 Deceleration Rate 3 RW Num US
02.024 Deceleration Rate 4 RW Num US
02.025 Deceleration Rate 5 RW Num US
02.026 Deceleration Rate 6 RW Num US
02.027 Deceleration Rate 7 RW Num US
02.028 Deceleration Rate 8 RW Num US
02.029 Jog Deceleration Rate 0.0 to VM_ACCEL_RATE s / 100 Hz 0.2 s / 100 Hz RW Num US
02.030 Acceleration Rate Selected 0 to 8
RO Num ND NC PT
02.031 Deceleration Rate Selected 0 to 8
RO Num ND NC PT
02.032 Acceleration Rate Select Bit 0 Off (0) or On (1) Off (0) RW Bit NC
02.033 Acceleration Rate Select Bit 1 Off (0) or On (1) Off (0) RW Bit NC
02.034 Acceleration Rate Select Bit 2 Off (0) or On (1) Off (0) RW Bit NC
02.035 Deceleration Rate Select Bit 0 Off (0) or On (1) Off (0) RW Bit NC
02.036 Deceleration Rate Select Bit 1 Off (0) or On (1) Off (0) RW Bit NC
02.037 Deceleration Rate Select Bit 2 Off (0) or On (1) Off (0) RW Bit NC
02.039 Ramp Rate Units
0 (s/100 Hz),
1 (s/Maximum Frequency),
2 (s/1000 Hz)
0 (s/100 Hz) RW Num US
02.040 S Ramp Percentage 0.0 to 50.0 % 0.0 % RW Num US
02.041 SRampSet-upMode 0to2 0 RW Num US
02.042 Maximum Rate Of Change Of Acceleration 1 0.0 to 300.0 s²/100 Hz 0.0 s²/100 Hz RW Num US
02.043 Maximum Rate Of Change Of Acceleration 2 0.0 to 300.0 s²/100 Hz 0.0 s²/100 Hz RW Num US
02.044 Maximum Rate Of Change Of Acceleration 3 0.0 to 300.0 s²/100 Hz 0.0 s²/100 Hz RW Num US
02.045 Maximum Rate Of Change Of Acceleration 4 0.0 to 300.0 s²/100 Hz 0.0 s²/100 Hz RW Num US
RW Read / Write RO Read only Num Number parameter Bit Bit parameter Txt Text string Bin Binary parameter FI Filtered
ND No default value NC Not copied PT Protected parameter RA Rating dependent US User save PS Power-down save DE Destination
Date Date parameter Time Time parameter