Emerson Unidrive M100 - Page 67

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization NV Media Card
Advanced
parameters
Diagnostics UL Listing
Unidrive M100 / M101 Control User Guide 67
Issue Number: 1
06.061 Standby Mode Mask 0 to 3 0 RW Bin US
06.071
Slow Rectifier Charge Rate
Enable
Off (0) or On (1) Off (0) RW Bit US
06.073 Braking IGBT Lower Threshold 0 to VM_DC_VOLTAGE_SET V
110 V drive: 390 V
200 V drive: 390 V
400 V drive: 780 V
RW Num RA US
06.074 Braking IGBT Upper Threshold 0 to VM_DC_VOLTAGE_SET V
110 V drive: 390 V
200 V drive: 390 V
400 V drive: 780 V
RW Num RA US
06.075
Low Voltage Braking IGBT
Threshold
0toVM_DC_VOLTAGE_SETV 0V RW Num RA US
06.076
Low Voltage Braking IGBT
Threshold Select
Off (0) or On (1) Off (0) RW Bit
06.077 Low DC Link Operation Off (0) or On (1) Off (0) RW Bit US
06.084 UTC Offset ± 24.00 Hours 0.00 Hours RW Num US
06.089 DC Injection Active Off (0) or On (1) RO Bit NC PT US
RW Read / Write RO Read only Num Number parameter Bit Bit parameter Txt Text string Bin Binary parameter FI Filtered
ND No default value NC Not copied PT Protected parameter RA Rating dependent US User save PS Power-down save DE Destination
Date Date parameter Time Time parameter
Parameter
Range (Ú) Default(Ö)
Type
OL OL