Emerson Unidrive M100 - Page 73

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization NV Media Card
Advanced
parameters
Diagnostics UL Listing
Unidrive M100 / M101 Control User Guide 73
Issue Number: 1
Parameter
Range
(Ú) Default (Ö)
Type
OL OL
08.001 Digital I/O 1 State (T10) Off (0) or On (1)
RO Bit ND NC PT
08.002 Digital Input 2 State(T11) Off (0) or On (1)
RO Bit ND NC PT
08.003 Digital Input 3 State (T12) Off (0) or On (1)
RO Bit ND NC PT
08.004 Digital Input 4 State (T13) Off (0) or On (1)
RO Bit ND NC PT
08.008 Relay 1 Output State Off (0) or On (1)
RO Bit ND NC PT
08.011 Digital I/O 1 Invert (T10) Not.Inv (0), InvErt (1) Not.Inv (0) RW Txt US
08.012 Digital Input 2 Invert (T11) Not.Inv (0), InvErt (1) Not.Inv (0) RW Txt US
08.013 Digital Input 3 Invert (T12) Not.Inv (0), InvErt (1) Not.Inv (0) RW Txt US
08.014 Digital Input 4 Invert (T13) Not.Inv (0), InvErt (1) Not.Inv (0) RW Txt US
08.018 Relay 1 Invert Not.Inv (0), InvErt (1) Not.Inv (0) RW Txt US
08.020 Digital I/O Read Word 0 to 2048
RO Num ND NC PT
08.021 Digital IO1 Source / Destination A (T10) 0.000 to 30.999 10.003 RW Num DE PT US
08.022 Digital Input 2 Destination A (T11) 0.000 to 30.999
50 Hz: 6.038
60 Hz: 6.039
RW Num DE PT US
08.023 Digital Input 03 Destination A (T12) 0.000 to 30.999
50 Hz: 6.030
60 Hz: 6.034
RW Num DE PT US
08.024 Digital Input 04 Destination A (T13) 0.000 to 30.999
50 Hz: 6.032
60 Hz: 6.031
RW Num DE PT US
08.028 Relay 1 Output Source A 0.000 to 30.999 10.001 RW Num PT US
08.031 Digital I/O 01 Output Mode (T10)
InPut (0), OutPut (1),
Fr (2), PuLSE (3)
OutPut (1) RW Txt US
08.043 24 V Supply Input State Off (0) or On (1)
RO Bit ND NC PT
08.053 24 V Supply Invert Not.Inv (0), InvErt (1) Not.Inv (0) RW Txt US
08.063 24 V Supply Input Destination 0.000 to 30.999 0.000 RW Num DE PT US
08.081 DI1 Control (T10) 0 to 21 0 RW Num US
08.082 DI2 Control (T11) 0 to 21 0 RW Num US
08.083 DI3 Control (T12) 0 to 21 0 RW Num US
08.084 DI4 Control (T13) 0 to 21 0 RW Num US
08.091 DO1 Control 0 to 20 0 RW Num US
08.098 Relay 1 Control 0 to 20 0 RW Num US
08.121 DI/O 01 Source / Destination B (T10) 0.000 to 30.999
RO Num DE PT US
08.122 Digital Input 2 Destination B (T11) 0.000 to 30.999
RO Num DE PT US
08.123 DI 03 Destination B (T12) 0.000 to 30.999
RO Num DE PT US
08.124 DI 04 Destination B (T13) 0.000 to 30.999
RO Num DE PT US
08.128 Relay 01 Source B 0.000 to 30.999 0.000 RW Num PT US
RW Read / Write RO Read only Num Number parameter Bit Bit parameter Txt Text string Bin Binary parameter FI Filtered
ND No default value NC Not copied PT Protected parameter RA Rating dependent US User save PS Power-down save DE Destination
Date Date parameter Time Time parameter