162 SI-Ethernet User Guide
Issue: 1
Vendor ID
Returns the vendor ID code 0x101 (257
10
) for Control Techniques.
Device type
Returns the device type code. The following codes are used:
Product code
Returns a 16 bit value to identify the drive type and drive mode and also links a node to
the installed EDS files. The product code is calculated as shown in Table 7.23 Product
code bit allocation below.
Drive Type (b15 to b11)
The drive type is defined as follows:
Drive Derivative (b10 to b6)
The drive derivative as shown in Pr 0.11.028.
For more information on the drive derivative codes please refer to the relevant drive
documentation.
Name: VendorID
Class 0x01 Default
0x101 (257
10
)
Instance 0x01 Data Type UINT
Attribute 0x01 Access Get
Name: DeviceType
Class 0x01 Default 0x02
Instance 0x01 Data Type UINT
Attribute 0x02 Access Get
Device Type code Drive type
0x02 AC Drive
Name: Product Code
Class 0x01 Default See below
Instance 0x01 Data Type UINT
Attribute 0x03 Access Get
Table 7.23 Product code bit allocation
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
Drive Type Drive Derivative Drive Mode CIP code
Value Drive Type
2 Unidrive M
To Next Page
Loading...
