SI-Ethernet User Guide 75
Issue: 1
Safety
information
Introduction
Mechanical
installation
Electrical
installation
Getting started Parameters
Key features
and Protocols
PC Applications Security Diagnostics
Glossary of
terms
Index
This parameter defines the slot in which an event will occur if a cyclic data timeout
occurs on the Rx3 link.
Defines the event to trigger in the given destination, as specified in Rx3 Timeout Event
Destination (S.10.067), if a cyclic data timeout occurs on the Rx3 link.
S.10.067 Rx3 Timeout Event Destination
Minimum 0 Maximum 4
Default 0 Units
Type 8 Bit User save Update Rate Read on reset
Display Format None Decimal Places 0
Coding RW, TE, BU
Value Text Description
0 This slot Trigger module event in this slot
1 Slot 1 Trigger module event in slot 1
2 Slot 2 Trigger module event in slot 2
3 Slot 3 Trigger module event in slot 3
4 Slot 4 Trigger module event in slot 4
This feature is not yet implemented.
S.10.068 Rx3 Timeout Event Type
Minimum 0 Maximum 4
Default 0 Units
Type 8 Bit User save Update Rate Read on reset
Display Format None Decimal Places 0
Coding RW, TE, BU
Value Text Description
0 No Event No event
1 Event Trigger module event
2 Event 1 Trigger module event 1
3 Event 2 Trigger module event 2
4 Event 3 Trigger module event 3
This feature is not yet implemented.
To Next Page
Loading...
