Emerson Unidrive M700 - Page 81

SI-Ethernet User Guide 81
Issue: 1
Safety
information
Introduction
Mechanical
installation
Electrical
installation
Getting started Parameters
Key features
and Protocols
PC Applications Security Diagnostics
Glossary of
terms
Index
This parameter defines the action to be taken when a late synchronized frame is
received on the Rx1 link.
Defines the destination (slot) to trigger the event when a late synchronized frame is
received on the Rx1 link.
Value Text Description
1 Trip Trip drive with Slx.Er and sub-trip code
2 Do not use The data is ignored
3 Use The data is used immediately
S.11.041 Rx1 Late Synchronisation Frame Destination
Minimum 0 Maximum 4
Default 0 Units
Type 8 Bit User Save Update Rate Read on reset
Display Format None Decimal Places 0
Coding RW, TE, BU
Value Text Description
0 This slot Trigger module event in this slot
1 Slot 1 Trigger module event in slot 1
2 Slot 2 Trigger module event in slot 2
3 Slot 3 Trigger module event in slot 3
4 Slot 4 Trigger module event in slot 4
This feature is not yet implemented.
S.11.042 Rx1 Late Synchronisation Frame Event
Minimum 0 Maximum 4
Default 0 Units
Type 8 Bit User Save Update Rate Read on reset
Display Format None Decimal Places 0
Coding RW, TE, BU
Value Text Description
0 No Event No event
1 Event Trigger module event
2 Event 1 Trigger module event 1
3 Event 2 Trigger module event 2
4 Event 3 Trigger module event 3
NOTE