Emerson White-Rodgers 1F75H-21NP User Manual (English)

Other manuals for Emerson White-Rodgers 1F75H-21NP

Installation And Operating Instructions8 pages

Questions and Answers:

M
morrisonmichaelSep 9, 2025
What to do if “Call for Service” icon appears on my Emerson White-Rodgers 1F75H-21NP Thermostat?
- D
  David WilliamsSep 10, 2025
  The “Call for Service” icon on your Emerson Thermostat can appear for several reasons: 1. ) The heating system cannot heat the space to within 10 degrees of the setpoint within 2 hours. See corrective action for “No Heat”. 2. ) The cooling system cannot cool the space to within 10 degrees of the setpoint within 2 hours. See corrective action for “No Cool”. 3. ) If “--” is displayed for the Room Temperature, a replacement thermostat is needed. 4. ) None of the buttons operate on the thermostat. Make sure keypad lockout is not turned on (denoted by icon). 5. ) If “Call for Service” is flashing, compressor self diagnostic is detecting an issue with the outdoor unit. Contact a service person to verify the equipment is operating correctly.
J
johnsonkevinSep 12, 2025
Why is my Emerson White-Rodgers 1F75H-21NP Thermostat not cooling?
- K
  Katherine KnoxSep 12, 2025
  If your Emerson Thermostat isn't cooling, start by verifying that the System Switch is set to Cool and lower the setpoint below room temperature, ensuring the thermostat and system wires are securely attached. Also, check for any loose connections to the thermostat or system, making sure all wires are securely attached. If the thermostat still doesn't click, try the reset operation. If it remains unresponsive after resetting, contact your heating and cooling service person or place of purchase for a replacement.
C
Christopher GilmoreSep 14, 2025
Why does my Emerson White-Rodgers 1F75H-21NP Display & Thermometer Disagree?
- V
  victorpetersonSep 14, 2025
  If your Emerson Thermostat display and thermometer disagree, it might be that the thermostat display requires adjustment. The display can be adjusted +/-5°.