White-Rodgers 70 Series Thermostat Line Extension
37
Setting the Schedule
Programmable (PR) Models Only
1. Move SYSTEM switch to HEAT
2. Press PROGRAM once. “Mon Tue Wed Thu Fri” (indicating
weekday program) will appear in the display.
3. Press the UP or DOWN button to select the temperature for
the 1
st
heating program period.
4. Press PROGRAM once (the programmed time will flash).
Press the UP or DOWN button to select your time in 15
minute increments.
5. Press PROGRAM once. The currently programmed start time
and setpoint temperature for the 2
nd
heating program period
will appear.
6. Repeat steps 3 and 4 to select the start time and heating
temperature for the 2
nd
heating program period.
7. Repeat steps 3-5 for the 3
rd
and 4
th
heating program periods.
8. Press PROGRAM once. “Sat” (Saturday) will appear in the
display, along with the start time for the 1
st
heating period and
the currently programmed temperature.
9. Repeat steps 3-7 to complete Saturday heating programming.
10.Press PROGRAM once to change to “Sun” (Sunday) heating
programming and repeat steps 3-7 to complete Sunday
programming.
11.When you have completed entering the heating program,
press RUN/HOLD.
12.Move system switch to COOL and follow steps 1-11 to enter
the cooling program.
1F75H-21PR
To Next Page
Loading...
