29
4. Press and hold either or until you reach the correct minutes.
5. Press TIME once. The display will show the day of the week.
6. Press or until you reach the current day of the week.
7. Press RUN once. The display will show the correct time and room temperature alternately.
Set Heating Program
1. Move the SYSTEM switch to HEAT.
2. Press PRGM once. “MO TU W TH FR” (indicating weekday program) will appear in the display. Also displayed
are the currently programmed start time for the 1st heating period and the currently programmed temperature
(flashing).
EXAMPLE:
AM
MO TU WE TH FR
This display window shows that for the 1st weekday period, the start time is 6:00 AM, and 68° is the
programmed temperature (this example reflects factory preprogramming).
To Next Page
Loading...
