4 Commissioning
4.1 Overview
This section discusses the installation and setup of the optional software included with the
Emerson Smart Wireless Gateway 1410. This software is not required for the wireless field
network to operate; however, it will aid in secure host integration as well as wireless field
device configuration. The following table describes what items are installed and on which
disk they can be found.
Table 4-1: Software Applications
Name Description Location
Security Setup Utility This utility allows the setup of SSL enabled
communications between the Gateway and host system.
Disk 1
AMS
™
Wireless
Configurator
This application allows complete configuration of wireless
field devices and provides added security through drag
and drop provisioning.
Disk 2
Network Configuration This application configures AMS Wireless Configurator to
interface to a Wireless Network or a HART
®
Modem.
Disk 2
Additional system components may be installed depending on the current configuration
of the system.
4.2 System requirements
Table 4-2: PC Hardware
Minimum requirements Recommended requirements
Intel
®
Core 2 Duo, 2.0 GHz Intel Core 2 Quad, 2.0 GHz or greater
1 GB Memory 3 GB Memory or Greater
1.5 GB free hard disk space 2 GB or more of free hard disk space
Note
Additional hard disk space is required for SNAP-ON
™
applications. The minimum monitor
requirements are 1024 × 768 resolution and 16-bit color.
Table 4-3: Supported Operating Systems
Operating system Version
Microsoft
®
Windows
™
XP Professional, Service Pack 3
Windows Server 2003 Standard, Service Pack 2
Windows Server 2003 R2 Standard, Service Pack 2
Windows Server 2008 Standard, Service Pack 2
Reference Manual Commissioning
00809-0200-4410 September 2020
Emerson.com/Rosemount 25
To Next Page
Loading...
Need help?
General
