EMH ITZ - Meter Readout; Communication Software Usage

30
9 Meter readout
9.1 Communication software
The standard communication software for the ITZ is the EMH-COM or
EMH-COMBI-MASTER 2000.
Figure 15: EMH-COMBI-MASTER 2000
With the program you can carry out the following:
- Read out the output lists
- Set the clock
- Carry out a cumulation
- Read out the identity numbers and write into the meter
- Read out baud rate of the external interface and write into the meter
- Reset the manipulation register
- Send write and read commands to the meter
- Tariff configuration (optional)